DD Form 2554-3 "Tdp Option Selection Worksheet Developmental Design Drawings and Associated Lists"

What Is DD Form 2554-3?

This is a form that was released by the U.S. Department of Defense (DoD) on December 1, 1989. The form, often mistakenly referred to as the DA Form 2554-3, is a military form used by and within the U.S. Army. As of today, no separate instructions for the form are provided by the DoD.

Form Details:

  • A 1-page document available for download in PDF;
  • The latest version available from the Executive Services Directorate;
  • Editable, printable, and free to use;

Download an up-to-date fillable DD Form 2554-3 down below in PDF format or browse hundreds of other DoD Forms compiled in our online library.

ADVERTISEMENT
ADVERTISEMENT

Download DD Form 2554-3 "Tdp Option Selection Worksheet Developmental Design Drawings and Associated Lists"

1043 times
Rate (4.5 / 5) 181 votes
TDP OPTION SELECTION WORKSHEET
DEVELOPMENTAL DESIGN DRAWINGS AND ASSOCIATED LISTS
A. CONTRACT NO.
B. EXHIBIT/ATTACHMENT NO.
C. CLIN.
D. CDRL DATA ITEM NO.
1. DELIVERABLE PRODUCT (X and complete as applicable)
a. ORIGINALS (Drawing masters) (Identify specification, type, grade and class, etc.)
b. REPRODUCTIONS (Identify specification, type, grade and class, etc., and quantity of each)
c. DIGITAL DATA (Identify specification, exchange media, etc.)
2. CAGE CODE AND DOCUMENT NUMBERS (X one)
a. CONTRACTOR
b. GOVERNMENT (Complete (1) and (2) or (3))
(1) Use CAGE Code
(2) Use Document Numbers
(3) To Be Assigned By:
3. DRAWING FORMATS AND DRAWING FORMS (X one and complete as applicable)
a. CONTRACTOR FORMATS. Forms to be supplied by contractor.
b. GOVERNMENT FORMATS. Forms to be supplied by contractor.
Samples supplied by (Specify)
c. GOVERNMENT FORMATS. Forms to be supplied as
Government Furnished Material by (Specify)
4. TYPES AND QUANTITY OF DRAWINGS SELECTION (X one)
a. CONTRACTOR SELECTS
b. GOVERNMENT SELECTS (Specify in Item 8)
5. ASSOCIATED LISTS (X and complete as applicable)
a. PARTS LISTS (X one)
(1) Integral
(2) Separate
(3) Contractor's Option
(2) Required (Specify levels of assembly)
b. DATA LISTS (X one)
(1) Not Required
(2) Required (Specify levels of assembly)
c. INDEX LISTS (X one)
(1) Not Required
6. DETAILS (X one)
a. MULTIDETAIL DRAWINGS PERMITTED
b. MONODETAIL DRAWINGS MANDATORY
7. APPLICABILITY OF DOD-STD-100. The following chapters of DOD-STD-100 apply: (X as applicable)
a. CHAPTER 300,
b. CHAPTER 400, "NUMBERING
c. CHAPTER 500, "REVISION OF
"DRAWING TITLES"
CODING AND IDENTIFICATION"
ENGINEERING DRAWINGS"
8. OTHER TAILORING (Attach additional sheets as necessary)
DD Form 2554-3, DEC 89
Reset
Adobe Professional 8.0
TDP OPTION SELECTION WORKSHEET
DEVELOPMENTAL DESIGN DRAWINGS AND ASSOCIATED LISTS
A. CONTRACT NO.
B. EXHIBIT/ATTACHMENT NO.
C. CLIN.
D. CDRL DATA ITEM NO.
1. DELIVERABLE PRODUCT (X and complete as applicable)
a. ORIGINALS (Drawing masters) (Identify specification, type, grade and class, etc.)
b. REPRODUCTIONS (Identify specification, type, grade and class, etc., and quantity of each)
c. DIGITAL DATA (Identify specification, exchange media, etc.)
2. CAGE CODE AND DOCUMENT NUMBERS (X one)
a. CONTRACTOR
b. GOVERNMENT (Complete (1) and (2) or (3))
(1) Use CAGE Code
(2) Use Document Numbers
(3) To Be Assigned By:
3. DRAWING FORMATS AND DRAWING FORMS (X one and complete as applicable)
a. CONTRACTOR FORMATS. Forms to be supplied by contractor.
b. GOVERNMENT FORMATS. Forms to be supplied by contractor.
Samples supplied by (Specify)
c. GOVERNMENT FORMATS. Forms to be supplied as
Government Furnished Material by (Specify)
4. TYPES AND QUANTITY OF DRAWINGS SELECTION (X one)
a. CONTRACTOR SELECTS
b. GOVERNMENT SELECTS (Specify in Item 8)
5. ASSOCIATED LISTS (X and complete as applicable)
a. PARTS LISTS (X one)
(1) Integral
(2) Separate
(3) Contractor's Option
(2) Required (Specify levels of assembly)
b. DATA LISTS (X one)
(1) Not Required
(2) Required (Specify levels of assembly)
c. INDEX LISTS (X one)
(1) Not Required
6. DETAILS (X one)
a. MULTIDETAIL DRAWINGS PERMITTED
b. MONODETAIL DRAWINGS MANDATORY
7. APPLICABILITY OF DOD-STD-100. The following chapters of DOD-STD-100 apply: (X as applicable)
a. CHAPTER 300,
b. CHAPTER 400, "NUMBERING
c. CHAPTER 500, "REVISION OF
"DRAWING TITLES"
CODING AND IDENTIFICATION"
ENGINEERING DRAWINGS"
8. OTHER TAILORING (Attach additional sheets as necessary)
DD Form 2554-3, DEC 89
Reset
Adobe Professional 8.0