"Examination for Registered Lpg Meter Technicians" - Delaware

Examination for Registered Lpg Meter Technicians is a legal document that was released by the Delaware Department of Agriculture - a government authority operating within Delaware.

Form Details:

  • The latest edition currently provided by the Delaware Department of Agriculture;
  • Ready to use and print;
  • Easy to customize;
  • Compatible with most PDF-viewing applications;
  • Fill out the form in our online filing application.

Download a printable version of the form by clicking the link below or browse more documents and templates provided by the Delaware Department of Agriculture.

ADVERTISEMENT
ADVERTISEMENT

Download "Examination for Registered Lpg Meter Technicians" - Delaware

1201 times
Rate (4.5 / 5) 72 votes
Applicant Name:___________________________
Delaware Department of Agriculture
Weights and Measures
Examination for Registered LPG Meter Technicians
1.
The Delaware Weights and Measures Act is Delaware Code Title 6
Chapter_____________________.
2.
The Act gives weights and measures officials authority over the following equipment:
1.
Devices used solely by a manufacturer for its own purposes
2.
Devices used in the buying and/or selling of a product
3.
Devices used only in fueling a fleet of company trucks and cars.
3.
The test measures used by technicians are required to be certified by an accredited NIST
laboratory:
1.
As often as determined by the Department of Agriculture
2.
Every two years
3.
Every year
4.
Every three years
4.
Following an inspection and test, the weights and measures inspector has the authority to
take the following official action:
1.
Approve
2.
Reject
3.
Condemn and seize for evidence
4.
All of the above
5.
A registered service technician has the authority to:
1.
Remove from a device an official weights and measures seal or tag
2.
Take a device out of service when it is found to be out of tolerance
3.
Place a device into commercial service following corrective service
4.
All of the above
6.
A registered service technician is required to notify weights and measures (send in a
Placed in Service Report) within
day (s) after placing a device into service.
7.
A registered service technician should have a current year N.I.S.T.
Handbook
.
Applicant Name:___________________________
Delaware Department of Agriculture
Weights and Measures
Examination for Registered LPG Meter Technicians
1.
The Delaware Weights and Measures Act is Delaware Code Title 6
Chapter_____________________.
2.
The Act gives weights and measures officials authority over the following equipment:
1.
Devices used solely by a manufacturer for its own purposes
2.
Devices used in the buying and/or selling of a product
3.
Devices used only in fueling a fleet of company trucks and cars.
3.
The test measures used by technicians are required to be certified by an accredited NIST
laboratory:
1.
As often as determined by the Department of Agriculture
2.
Every two years
3.
Every year
4.
Every three years
4.
Following an inspection and test, the weights and measures inspector has the authority to
take the following official action:
1.
Approve
2.
Reject
3.
Condemn and seize for evidence
4.
All of the above
5.
A registered service technician has the authority to:
1.
Remove from a device an official weights and measures seal or tag
2.
Take a device out of service when it is found to be out of tolerance
3.
Place a device into commercial service following corrective service
4.
All of the above
6.
A registered service technician is required to notify weights and measures (send in a
Placed in Service Report) within
day (s) after placing a device into service.
7.
A registered service technician should have a current year N.I.S.T.
Handbook
.
8.
The General Code of Handbook 44 applies to all commercial devices. Paragraphs in The
General Code begin with the letter
. Paragraphs in the code begins with
,
,
,
, and
.
9.
Handbook 44 paragraphs are retroactive or non-retroactive. In G-S.1., subparagraphs (a)
and (b) are
. Subparagraphs (c), (d), (e), and (f)
are
.
10.
All commercial devices must be marked with the name, initials or trademark of the (a)
manufacturer and (b) the model designation.
1.
True
2.
False
11.
Meters that are predominantly in error favorable to the owner/operator (test measure
readings are minus) are considered to be improperly maintained according to Paragraph
G-_______________.
12.
Paragraph
G-
states that, whenever equipment is adjusted, the
adjustments shall bring performance errors as close as practicable to
.
13.
Tolerances applied to devices being placed into service for the first time, being officially
tested for the first time, after calibration, and following major service or overhaul is
tolerance.
14.
Tolerances applied to devices in service that are being routinely tested is
tolerance.
15.
The requirement for the repeatability tolerance shall not exceed
percent of
the absolute value of maintenance tolerance with all results in tolerance.
16.
The acceptance tolerance for a 100-gallon test is
cu. in.
17.
The maintenance tolerance for a 100-gallon test is
cu. in.
18.
A wet hose with a shut off valve at the outlet is required for a LPG delivery hose
1.
True
2.
False
19.
For an accurate reading, the test measure must be level. A technician reads the bottom or
top surface of the meniscus?
.
20.
Vehicle tank meters and all attachment s (e.g. hoses, hose retractors, nozzles, displays,
couplings, impact/fire valves, wiring, etc.) shall be maintained in proper operating
condition throughout the term of service.
(Paragraph
G-UR
)
21.
If provisions have been made for sealing (a physical seal), the device shall be sealed.
Where is this referenced in Handbook 44?
(Paragraph
G-UR
)
22.
If a device is equipped with an Automatic Temperature Compensate (ATC), this shall be
connected, operable, and in use at all times. Paragraph (___UR-________________)
1. True
2. False
23.
For test purposes, where in Handbook 44 is the requirement for a thermometer well?
a. ____________________________
b. ____________________________
24.
Provisions shall be made to apply a security seal in such a manner that an ATC system
cannot be disconnected or adjusted. Paragraph (____G-UR 4.5 & S.2.6.2____)
1. True
2. False
25.
The “normal” test of a device shall be made at the _______________discharge flow rate
of that device.
Page of 3