DD Form 2554-1 "Tdp Option Selection Worksheet, Product Drawings and Associated Lists"

What Is DD Form 2554-1?

This is a form that was released by the U.S. Department of Defense (DoD) on December 1, 1989. The form, often mistakenly referred to as the DA Form 2554-1, is a military form used by and within the U.S. Army. As of today, no separate instructions for the form are provided by the DoD.

Form Details:

  • A 1-page document available for download in PDF;
  • The latest version available from the Executive Services Directorate;
  • Editable, printable, and free to use;

Download an up-to-date fillable DD Form 2554-1 down below in PDF format or browse hundreds of other DoD Forms compiled in our online library.

ADVERTISEMENT
ADVERTISEMENT

Download DD Form 2554-1 "Tdp Option Selection Worksheet, Product Drawings and Associated Lists"

577 times
Rate (4.3 / 5) 234 votes
TDP OPTION SELECTION WORKSHEET
PRODUCT DRAWINGS AND ASSOCIATED LISTS
A. CONTRACT NO.
B.
EXHIBIT/ATTACHMENT
NO.
C.
CLIN.
D. CDRL DATA ITEM NO.
1.
DELIVERABLE
PRODUCT (X and complete as applicable)
a.
ORIGINALS
(Drawing masters) (Identify specification, type, grade and class, etc.)
b. REPRODUCTIONS (Identify specification, type, grade and class, etc., and quantity of each)
c.
DIGITAL DATA
(Identify specification, exchange media, etc.)
2.
CAGE CODE AND DOCUMENT NUMBERS
(X one)
a.
CONTRACTOR
b. GOVERNMENT (Complete (1) and (2) or (3))
(1) Use CAGE Code
(2) Use Document Numbers
(3) To Be Assigned By:
3. DRAWING FORMATS AND DRAWING FORMS (X one and complete as applicable)
a.
CONTRACTOR FORMATS.
Forms to be supplied by contractor.
b. GOVERNMENT FORMATS. Forms to be supplied by contractor.
Samples supplied by (Specify)
c.
GOVERNMENT FORMATS.
Forms to be supplied as
Government Furnished Material by (Specify)
AND QUANTITY OF DRAWINGS SELECTION (X one)
4.
TYPES
a.
CONTRACTOR SELECTS
b. GOVERNMENT SELECTS (Specify in Item 9)
5.
ASSOCIATED
LISTS (X and complete as applicable)
a.
PARTS
LISTS (X one)
(1) Integral
(2) Separate
(3) Contractor's Option
(2) Required (Specify levels of assembly)
b. DATA LISTS (X one)
(1) Not Required
(2) Required (Specify levels of assembly)
c.
INDEX LISTS
(X one)
(1) Not Required
(X one)
6.
DETAILS
a.
MULTIDETAIL
DRAWINGS PERMITTED
b. MONODETAIL DRAWINGS MANDATORY
7.
QUALITY
ASSURANCE PROVISIONS (X one)
a.
NOT REQUIRED.
MIL-T-31000, para
3.8 does not apply.
b. REQUIRED.
MIL-T-31000, para
3.8 applies.
Quality assurance requirements shall
be documented as QAPs in accordance with
MIL-T-31000, Appendix B. (X one)
(1) DARCOM Form 2484-R Required
(2) DARCOM Form 2484-R Not Required
8.
VENDOR
SUBSTANTIATION DATA (X one)
a.
NOT REQUIRED
b. REQUIRED
9.
OTHER TAILORING
(Attach additional sheets as necessary)
DD Form 2554-1, DEC 89
Reset
Adobe Professional 8.0
TDP OPTION SELECTION WORKSHEET
PRODUCT DRAWINGS AND ASSOCIATED LISTS
A. CONTRACT NO.
B.
EXHIBIT/ATTACHMENT
NO.
C.
CLIN.
D. CDRL DATA ITEM NO.
1.
DELIVERABLE
PRODUCT (X and complete as applicable)
a.
ORIGINALS
(Drawing masters) (Identify specification, type, grade and class, etc.)
b. REPRODUCTIONS (Identify specification, type, grade and class, etc., and quantity of each)
c.
DIGITAL DATA
(Identify specification, exchange media, etc.)
2.
CAGE CODE AND DOCUMENT NUMBERS
(X one)
a.
CONTRACTOR
b. GOVERNMENT (Complete (1) and (2) or (3))
(1) Use CAGE Code
(2) Use Document Numbers
(3) To Be Assigned By:
3. DRAWING FORMATS AND DRAWING FORMS (X one and complete as applicable)
a.
CONTRACTOR FORMATS.
Forms to be supplied by contractor.
b. GOVERNMENT FORMATS. Forms to be supplied by contractor.
Samples supplied by (Specify)
c.
GOVERNMENT FORMATS.
Forms to be supplied as
Government Furnished Material by (Specify)
AND QUANTITY OF DRAWINGS SELECTION (X one)
4.
TYPES
a.
CONTRACTOR SELECTS
b. GOVERNMENT SELECTS (Specify in Item 9)
5.
ASSOCIATED
LISTS (X and complete as applicable)
a.
PARTS
LISTS (X one)
(1) Integral
(2) Separate
(3) Contractor's Option
(2) Required (Specify levels of assembly)
b. DATA LISTS (X one)
(1) Not Required
(2) Required (Specify levels of assembly)
c.
INDEX LISTS
(X one)
(1) Not Required
(X one)
6.
DETAILS
a.
MULTIDETAIL
DRAWINGS PERMITTED
b. MONODETAIL DRAWINGS MANDATORY
7.
QUALITY
ASSURANCE PROVISIONS (X one)
a.
NOT REQUIRED.
MIL-T-31000, para
3.8 does not apply.
b. REQUIRED.
MIL-T-31000, para
3.8 applies.
Quality assurance requirements shall
be documented as QAPs in accordance with
MIL-T-31000, Appendix B. (X one)
(1) DARCOM Form 2484-R Required
(2) DARCOM Form 2484-R Not Required
8.
VENDOR
SUBSTANTIATION DATA (X one)
a.
NOT REQUIRED
b. REQUIRED
9.
OTHER TAILORING
(Attach additional sheets as necessary)
DD Form 2554-1, DEC 89
Reset
Adobe Professional 8.0