Instructions for Form C-104 "Request for Allowable and Authorization to Transport" - New Mexico

This document contains official instructions for Form C-104, Request for Allowable and Authorization to Transport - a form released and collected by the New Mexico Energy, Minerals and Natural Resources Department. An up-to-date fillable Form C-104 is available for download through this link.

Instruction Details:

  • This 1-page document is available for download in PDF;
  • Actual and applicable for the current year;
  • Complete, printable, and free.

Download your copy of the instructions by clicking the link below or browse hundreds of other forms in our library of forms released by the New Mexico Energy, Minerals and Natural Resources Department.

ADVERTISEMENT
ADVERTISEMENT

Download Instructions for Form C-104 "Request for Allowable and Authorization to Transport" - New Mexico

Download PDF

Fill PDF online

Rate (4.6 / 5) 18 votes
New Mexico Oil Conservation Division
C-104 Instructions
October 13, 2009
IF THIS IS AN AMENDED REPORT, CHECK THE BOX LABELED "AMENDED REPORT" AT THE TOP OF THIS DOCUMENT
Report all gas volumes at 15.025 PSIA at 60º.
Report all oil volumes to the nearest whole barrel.
A request for allowable for a newly drilled or deepened well must be accompanied by a tabulation of the deviation tests conducted in accordance with
Rule 19.15.16.14 NMAC.
All sections of this form must be filled out for allowable requests on new and recompleted wells.
A separate C-104 must be filed for each pool in a multiple completion.
Improperly filled out or incomplete forms may be returned to operators unapproved.
completed well bore diagram
1.
Operator's name and address
27.
Hole size.
2.
Operator's OGRID number. If you do not have one, please
read the FAQ “How Do I Become A Well Operator?” at
28.
Outside diameter of the casing and tubing.
www.emnrd.state.nm.us/ocd.
29.
Depth of casing and tubing. If a casing liner, show top and
3.
Reason for filing code from the following table:
bottom.
NW
New Well
RC
Recompletion
30.
Number of sacks of cement used per casing string.
RT
Request for test allowable (Include volume
requested)
The following test data is for an oil well. It must be from a test
If for any other reason write that reason in this box.
conducted only after the total volume of load oil is recovered.
4.
The API number of this well.
31.
MM/DD/YY that new oil was first produced.
5.
The name of the pool for this completion.
32.
MM/DD/YY that gas was first produced into a pipeline.
6.
The pool code for this pool.
33.
MM/DD/YY that the following test was completed.
7.
The property code for this completion.
34.
Length in hours of the test.
8.
The property name (well name) for this completion.
35.
Flowing tubing pressure - oil wells
Shut-in tubing pressure - gas wells
9.
The well number for this completion.
36.
Flowing casing pressure - oil wells
10.
The surface location of this completion. NOTE: If the
Shut-in casing pressure - gas wells
United States government survey designates a Lot Number
for this location use that number in the 'UL or lot no.' box.
37.
Diameter of the choke used in the test.
Otherwise use the OCD unit letter.
38.
Barrels of oil produced during the test.
11.
The bottom hole location of this completion.
39.
Barrels of water produced during the test.
12.
Lease code from the following table:
F
Federal
40.
MCF of gas produced during the test.
S
State
P
Fee
41.
The method used to test the well:
J
Jicarilla
F
Flowing
N
Navajo
P
Pumping
U
Ute Mountain Ute
S
Swabbing
I
Other Indian Tribe
If other method please write it in.
13.
The producing method code from the following table:
42.
The signature, printed name, title, and e-mail address of the
F
Flowing
person authorized to make this report, the date this report was
P
Pumping or other artificial lift
signed, and the telephone number to call for questions about
this report.
14.
MM/DD/YY that this completion was first connected to a gas
transporter.
15.
The permit number from the District approved C-129 for this
completion.
16.
MM/DD/YY of the C-129 approval for this completion.
17.
MM/DD/YY of the expiration of C-129 approval for this
completion.
18.
The gas or oil transporter's OGRID number.
19.
Name and address of the transporter of the product.
20.
Product code from the following table:
O
Oil
G
Gas
W
Water
21.
MM/DD/YY drilling commenced.
22.
MM/DD/YY this completion was ready to produce.
23.
Total measured depth of the well.
24.
Plugback measured depth.
25.
Top and bottom perforation in this completion or casing shoe
and TD if openhole.
26.
Write in 'DHC' if this completion is downhole commingled
with another completion or 'MC' if there is more than one
non-commingled completion in this well bore. Attach actual
New Mexico Oil Conservation Division
C-104 Instructions
October 13, 2009
IF THIS IS AN AMENDED REPORT, CHECK THE BOX LABELED "AMENDED REPORT" AT THE TOP OF THIS DOCUMENT
Report all gas volumes at 15.025 PSIA at 60º.
Report all oil volumes to the nearest whole barrel.
A request for allowable for a newly drilled or deepened well must be accompanied by a tabulation of the deviation tests conducted in accordance with
Rule 19.15.16.14 NMAC.
All sections of this form must be filled out for allowable requests on new and recompleted wells.
A separate C-104 must be filed for each pool in a multiple completion.
Improperly filled out or incomplete forms may be returned to operators unapproved.
completed well bore diagram
1.
Operator's name and address
27.
Hole size.
2.
Operator's OGRID number. If you do not have one, please
read the FAQ “How Do I Become A Well Operator?” at
28.
Outside diameter of the casing and tubing.
www.emnrd.state.nm.us/ocd.
29.
Depth of casing and tubing. If a casing liner, show top and
3.
Reason for filing code from the following table:
bottom.
NW
New Well
RC
Recompletion
30.
Number of sacks of cement used per casing string.
RT
Request for test allowable (Include volume
requested)
The following test data is for an oil well. It must be from a test
If for any other reason write that reason in this box.
conducted only after the total volume of load oil is recovered.
4.
The API number of this well.
31.
MM/DD/YY that new oil was first produced.
5.
The name of the pool for this completion.
32.
MM/DD/YY that gas was first produced into a pipeline.
6.
The pool code for this pool.
33.
MM/DD/YY that the following test was completed.
7.
The property code for this completion.
34.
Length in hours of the test.
8.
The property name (well name) for this completion.
35.
Flowing tubing pressure - oil wells
Shut-in tubing pressure - gas wells
9.
The well number for this completion.
36.
Flowing casing pressure - oil wells
10.
The surface location of this completion. NOTE: If the
Shut-in casing pressure - gas wells
United States government survey designates a Lot Number
for this location use that number in the 'UL or lot no.' box.
37.
Diameter of the choke used in the test.
Otherwise use the OCD unit letter.
38.
Barrels of oil produced during the test.
11.
The bottom hole location of this completion.
39.
Barrels of water produced during the test.
12.
Lease code from the following table:
F
Federal
40.
MCF of gas produced during the test.
S
State
P
Fee
41.
The method used to test the well:
J
Jicarilla
F
Flowing
N
Navajo
P
Pumping
U
Ute Mountain Ute
S
Swabbing
I
Other Indian Tribe
If other method please write it in.
13.
The producing method code from the following table:
42.
The signature, printed name, title, and e-mail address of the
F
Flowing
person authorized to make this report, the date this report was
P
Pumping or other artificial lift
signed, and the telephone number to call for questions about
this report.
14.
MM/DD/YY that this completion was first connected to a gas
transporter.
15.
The permit number from the District approved C-129 for this
completion.
16.
MM/DD/YY of the C-129 approval for this completion.
17.
MM/DD/YY of the expiration of C-129 approval for this
completion.
18.
The gas or oil transporter's OGRID number.
19.
Name and address of the transporter of the product.
20.
Product code from the following table:
O
Oil
G
Gas
W
Water
21.
MM/DD/YY drilling commenced.
22.
MM/DD/YY this completion was ready to produce.
23.
Total measured depth of the well.
24.
Plugback measured depth.
25.
Top and bottom perforation in this completion or casing shoe
and TD if openhole.
26.
Write in 'DHC' if this completion is downhole commingled
with another completion or 'MC' if there is more than one
non-commingled completion in this well bore. Attach actual