Form CE6 (DNR Form 542-0929) "Control Equipment Information for Catalytic and Non-catalytic Reduction" - Iowa

What Is Form CE6 (DNR Form 542-0929)?

This is a legal form that was released by the Iowa Department of Natural Resources - a government authority operating within Iowa. As of today, no separate filing guidelines for the form are provided by the issuing department.

Form Details:

  • Released on November 1, 2019;
  • The latest edition provided by the Iowa Department of Natural Resources;
  • Easy to use and ready to print;
  • Quick to customize;
  • Compatible with most PDF-viewing applications;
  • Fill out the form in our online filing application.

Download a fillable version of Form CE6 (DNR Form 542-0929) by clicking the link below or browse more documents and templates provided by the Iowa Department of Natural Resources.

ADVERTISEMENT
ADVERTISEMENT

Download Form CE6 (DNR Form 542-0929) "Control Equipment Information for Catalytic and Non-catalytic Reduction" - Iowa

Download PDF

Fill PDF online

Rate (4.6 / 5) 15 votes
Page background image
AIR QUALITY BUREAU
CE6
ATTN: Application Log in
th
502 E 9
St
Des Moines IA 50319
F
CE6: C
E
I
C
N
-C
ORM
ONTROL
QUIPMENT
NFORMATION FOR
ATALYTIC AND
ON
ATALYTIC
R
EDUCTION
(Please see instructions on reverse side.)
Company Name:
CONTROL EQUIPMENT DESCRIPTION
1. Control Equipment (CE) ID:
2. Emission Point (EP) ID:
3. Manufacturer:
4. Model:
5. Date of On-Site Installation:
6. Date of Modification:
7. Type of Control Equipment
:
Catalytic Reduction
Non-Catalytic Reduction
(check applicable type)
8. Control Equipment Description:
CONTROL EQUIPMENT PERFORMANCE MONITORING
9. Describe how your facility will monitor the performance of this control equipment
:
(check all that apply)
Catalyst Material Coupon or Sample Testing
Catalyst Life Time
Operating Temperature Range
Pressure Drop
Ammonia (or Urea) Injection Rate
Outlet Ammonia Concentration
Predictive Emissions Monitoring System (PEMS)
(attach documentation)
Continuous Emissions Monitoring System (CEMS)
(attach documentation)
Other
10. Describe the range and monitoring frequency of your control device monitoring choice(s):
DETAILED CONTROL EQUIPMENT SPECIFICATIONS
11. Manufacturer’s Data and Engineering Specifications Enclosed:
Yes
No NOTE: If yes, skip #11-#20
12. Catalyst Material (
):
if applicable
13. Catalyst Life Time (
):
if applicable
14. Number of Catalyst Beds (
):
if applicable
15. Total Catalyst Bed Volume (
):
if applicable
16. Residence Time
:
(seconds)
17. Operating Temperature Range (
):
°F
18. Pressure Drop Range (
):
inches of H
O, if applicable
2
19. Additive Injection Rate:
Anhydrous Ammonia
Liquid Ammonia
Urea
20. Maximum Ammonia Slip (
):
ppm
21. NO
Control Efficiency (
):
% Reduction
x
Assistance 1-877AIR IOWA (1-877-247-4692)
11/2019 cmc
DNR Form 542-0929
AIR QUALITY BUREAU
CE6
ATTN: Application Log in
th
502 E 9
St
Des Moines IA 50319
F
CE6: C
E
I
C
N
-C
ORM
ONTROL
QUIPMENT
NFORMATION FOR
ATALYTIC AND
ON
ATALYTIC
R
EDUCTION
(Please see instructions on reverse side.)
Company Name:
CONTROL EQUIPMENT DESCRIPTION
1. Control Equipment (CE) ID:
2. Emission Point (EP) ID:
3. Manufacturer:
4. Model:
5. Date of On-Site Installation:
6. Date of Modification:
7. Type of Control Equipment
:
Catalytic Reduction
Non-Catalytic Reduction
(check applicable type)
8. Control Equipment Description:
CONTROL EQUIPMENT PERFORMANCE MONITORING
9. Describe how your facility will monitor the performance of this control equipment
:
(check all that apply)
Catalyst Material Coupon or Sample Testing
Catalyst Life Time
Operating Temperature Range
Pressure Drop
Ammonia (or Urea) Injection Rate
Outlet Ammonia Concentration
Predictive Emissions Monitoring System (PEMS)
(attach documentation)
Continuous Emissions Monitoring System (CEMS)
(attach documentation)
Other
10. Describe the range and monitoring frequency of your control device monitoring choice(s):
DETAILED CONTROL EQUIPMENT SPECIFICATIONS
11. Manufacturer’s Data and Engineering Specifications Enclosed:
Yes
No NOTE: If yes, skip #11-#20
12. Catalyst Material (
):
if applicable
13. Catalyst Life Time (
):
if applicable
14. Number of Catalyst Beds (
):
if applicable
15. Total Catalyst Bed Volume (
):
if applicable
16. Residence Time
:
(seconds)
17. Operating Temperature Range (
):
°F
18. Pressure Drop Range (
):
inches of H
O, if applicable
2
19. Additive Injection Rate:
Anhydrous Ammonia
Liquid Ammonia
Urea
20. Maximum Ammonia Slip (
):
ppm
21. NO
Control Efficiency (
):
% Reduction
x
Assistance 1-877AIR IOWA (1-877-247-4692)
11/2019 cmc
DNR Form 542-0929
CE6
Instructions for F
CE6: C
E
I
NO
R
ORM
ONTROL
QUIPMENT
NFORMATION FOR
EDUCTION
X
If you have multiple pieces of control equipment that vent from one emission point, attach the appropriate
form for each piece of control equipment or control measure.
Understanding CE6 Form Information: Each number provides an explanation for the
corresponding field on the form.
Company Name: This is useful if application pages become separated.
Control Equipment Description
1. Control Equipment (CE) ID: Called the control equipment (CE) identification (ID). It can be any combination of letters
or numbers up to 16 characters in length. The ID should match the ID for this control equipment used on previous
construction permit applications and within this application. If also submitting an operating permit application, the ID
used in this application should be consistent with those used in the operating permit application.
2. Emission Point (EP) ID: Called the emission point (EP) identification (ID). It can be any combination of letters or
numbers up to 16 characters in length. The ID should match the ID for this equipment used on other construction
permit applications and within this application. If also submitting an operating permit application, the ID used in this
application should be consistent with those used in the operating permit application.
3. Manufacturer: Provide the manufacturer of the control equipment (if known).
4. Model: Provide the model number of the control equipment (if known). If custom, provide engineering specifications
as indicated in #11-#20.
5. Date of On-Site Installation: Provide the date when on-site installation of the control equipment began or will begin,
including the month and year.
For the purpose of this form, On-site Installation means the on-site fabrication, erection, or installation of any
equipment or control equipment that would result in a change in emissions.
6. Date of Modification: Provide the month and year of the last modification. In the case of a proposed modification,
provide the best estimate of the modification date.
For the purpose of this form, Modification means any physical change, or change in method of operation of
any existing equipment or control equipment.
7. Type of Control Equipment: Select the type of control equipment for NOx reduction; catalytic or non-catalytic
equipment.
8. Control Equipment Description: Describe the type of control equipment for NOx reduction. This name will be used
to describe the control equipment in the construction permit.
Performance Monitoring
9. Monitoring Control Equipment: Describe how your facility will monitor the performance of this control equipment.
Additional monitoring may be required by the DNR to ensure compliance with requested permit limits. Examples of
control equipment monitoring include measuring the minimum operation temperature; measuring the life of the
catalyst; etc.
10. Range and Monitoring Frequency: Describe the range (e.g., temperature, etc.) and the frequency of each
monitoring choice listed in #8. The range should provide for the normal operating range of the equipment and can be
obtained from the manufacturer and vendor. The range could also be determined from stack testing. The applicant
should provide an estimate of the frequency of parameter monitoring they feel is reasonable. Frequency can be as
often as continuously or can be as little as annually depending on the type of equipment, the monitoring parameter
chosen, and the importance of the control equipment to meet the emissions limits requested in the permit.
Assistance 1-877AIR IOWA (1-877-247-4692)
11/2019 cmc
DNR Form 542-0929
CE6
Detailed Control Equipment Specifications
11. Manufacturer’s Data and Engineering Specifications: Indicate whether supporting documentation, such as
manufacturer’s data or engineering specifications, is attached. The manufacturer’s data should provide a general
description of the control equipment and specific design specifications that would answer the remaining questions in
this section of the form. If yes, attach as a separate sheet labeled “Form CE6-10A”. If supporting documentation is
not attached, the department may request specific design and operational specifications for the equipment.
12. Catalyst Material: If the control equipment has a catalyst, provide the type of material.
13. Catalyst Life Time: If the control equipment has a catalyst, provide the catalyst life time (i.e. how long the catalyst
needs to be replaced or regenerated).
14. Number of Catalyst Beds: If the control equipment has a catalyst, provide the number of beds.
15. Total Catalyst Bed Volume: If the control equipment has a catalyst, provide the total volume of the catalyst beds.
16. Residence Time: Provide the residence time of the control equipment. This is not a value easily calculated by the
applicant and should be provided by the vendor.
17. Operating Temperature Range: Provide the temperature range in which the control equipment will operate.
18. Pressure Drop Range: If the control equipment has a catalyst bed, provide the operating pressure drop range
across the catalyst bed(s).
19. Additive Injection Rate: Provide the amount of additive that will be injected into the control system. In addition check
the appropriate box for the type of additive to be used.
20. Maximum Ammonia Slip: Ammonia slip refers to the amount of unreacted ammonia. Provide the maximum amount
of ammonia to be emitted from the emission point.
21. NO
Control Efficiency: Indicate the overall efficiency of the control device, as designed.
x
Assistance 1-877AIR IOWA (1-877-247-4692)
11/2019 cmc
DNR Form 542-0929
Page of 3