DEQ Form 2MW "Application for Authorization Under General Permit Okg38 to Discharge Filter Backwash Wastewater Under the Oklahoma Pollutant Discharge Elimination System (Opdes)" - Oklahoma

What Is DEQ Form 2MW?

This is a legal form that was released by the Oklahoma Department of Environmental Quality - a government authority operating within Oklahoma. As of today, no separate filing guidelines for the form are provided by the issuing department.

Form Details:

  • Released on February 1, 2008;
  • The latest edition provided by the Oklahoma Department of Environmental Quality;
  • Easy to use and ready to print;
  • Quick to customize;
  • Compatible with most PDF-viewing applications;
  • Fill out the form in our online filing application.

Download a printable version of DEQ Form 2MW by clicking the link below or browse more documents and templates provided by the Oklahoma Department of Environmental Quality.

ADVERTISEMENT
ADVERTISEMENT

Download DEQ Form 2MW "Application for Authorization Under General Permit Okg38 to Discharge Filter Backwash Wastewater Under the Oklahoma Pollutant Discharge Elimination System (Opdes)" - Oklahoma

179 times
Rate (4.6 / 5) 11 votes
Return to:
Oklahoma Department of
707 N. Robinson
Revised February 2008
Environmental Quality
P.O. Box 1677
previous editions
Water Quality Division
Oklahoma City, OK 73101-1677
are obsolete
Municipal Permitting Section
Oklahoma DEQ Application for Authorization to Discharge Filter
Backwash Wastewater for Potable Water Plants
Form 2MW – Discharge Filter Backwash
PLEASE DETACH THESE INSTRUCTIONS AND RETURN ONLY THE
COMPLETED APPLICATION FORM ITSELF.
This form must be completed by potable water treatment facilities with qualifying
filter backwash operation to apply for an authorization to discharge under general
permit OKG38 of DEQ’s Municipal OPDES Permit Program.
See instructions for the submittal requirements of applications.
Return to:
Oklahoma Department of
707 N. Robinson
Revised February 2008
Environmental Quality
P.O. Box 1677
previous editions
Water Quality Division
Oklahoma City, OK 73101-1677
are obsolete
Municipal Permitting Section
Oklahoma DEQ Application for Authorization to Discharge Filter
Backwash Wastewater for Potable Water Plants
Form 2MW – Discharge Filter Backwash
PLEASE DETACH THESE INSTRUCTIONS AND RETURN ONLY THE
COMPLETED APPLICATION FORM ITSELF.
This form must be completed by potable water treatment facilities with qualifying
filter backwash operation to apply for an authorization to discharge under general
permit OKG38 of DEQ’s Municipal OPDES Permit Program.
See instructions for the submittal requirements of applications.
OKLAHOMA DEPARTMENT OF ENVIRONMENTAL QUALITY
INSTRUCTIONS - DEQ FORM 2MW (minor)
APPLICATION FOR AUTHORIZATION FOR COVERAGE
UNDER GENERAL PERMIT OKG38 . . .
FOR POTABLE WATER FILTER BACKWASH DISCHARGE
Form 2MW must be completed by the owner/responsible official of a minor potable
water treatment facility that wishes to discharge filter backwash wastewater to waters of
the State of Oklahoma. Please read the instructions below while completing Form 2MW
and respond to each item. The Oklahoma Department of Environmental Quality (DEQ)
cannot evaluate an application until it is complete. If a particular item does not apply to
the facility for which the application is being prepared, or if the correct answer is "NA"
(for not applicable) indicate this on the application. If you have questions about any of
the items, please contact DEQ or your local DEQ office for assistance. DO NOT attempt
to complete the application form before reading these instructions.
NOTE: DO NOT write in box marked " FOR DEQ USE ONLY".
SECTION I
1.
Give the legal name of the town, city, public entity or name of the person (if
privately owned) legally responsible for operating and maintaining the facility.
2.
Give the street address, P.O. Box, city, county, state, zip code, telephone number
fax number, and e-mail address if applicable of the main office for the applicant in
Item 1. This may or may not be the same location of the facility.
3.
Give the name of the facility, the street address, telephone number fax number,
and e-mail address if applicable and if it is different from the address in Items 1
and 2.
4.
Give the physical location of the facility – longitude/latitude and legal description
to a 10 acre tract, 1/4,1/4,1/4, Section, Township and Range. Note: This is the
location of the treatment plant and it is not necessarily the same as the point of
discharge (No. 13).
5.
Indicate whether this is a Public, Private, Federal or State owned facility.
6.
Give the name, title, address, and telephone number, cell phone number, fax
number, and e-mail address of a person who is familiar with the facility and
information in the application and who may be contacted concerning the
application.
7.
Indicate whether the discharge is filter backwash wastewater from a potable water
plant or, if other, explain.
Form 2M2 Instructions - Page 2
8.
Below is a list of definitions of the types of treatment listed in Item #8. Check more
than one item if needed.
Detention lagoon systems:
Indicate the number of lagoons used to handle wastewater then indicate the type
of treatment.
A.
Conventional
B.
Package
C.
Reverse osmosis
D.
Other - Please name and explain any process used at your facility other than
those listed above.
9.
Please indicate the type of chemicals used in the water treatment process.
10.
The average quantity of potable water produced in million gallons per day (mgd).
List up to 3 decimal places. Example: 3.120 = 3 million one hundred twenty
thousand gallons per day.
11.
The total quantity of filter backwash wastewater discharged in million gallons per
day (mgd). List up to 3 decimal places. Example: 0.820 = eight hundred twenty
thousand gallons per day.
12.
Enter the number for each discharge point and the average quantity of treated
waste discharged each day from each pipe.
13.
Name the body of surface water that receives treated wastewater. If the receiving
stream does not have a name, please indicate what named creek or river
downstream receives the tributary flow, and fill out as "tributary of ________ Creek
or River."
Check the item which indicates the frequency of wastewater discharges.
continuous: discharging without interruption
batch:
discharging several times during the day (i.e. from a
sequential batch reactor facility)
intermittent:
sporadic discharges during the year
seasonal:
discharging only during certain periods during the year
Give the location of the point of discharge to the receiving water. This may be
different than the location of the facility. In giving the legal description, provide
both the latitude-longitude and 1/4, 1/4, 1/4, Section, Township and Range. Attach
addition sheets if necessary to describe additional outfalls.
14.
Disposal of water treatment plant residuals shall be done under a general permit
Form 2M2 Instructions - Page 3
for land application of residuals or in a permitted landfill.
A.
General permit land application of residuals numbers start with OKG and
usually have 7 numbers. In giving the land application sites, provide the
legal description 1/4, 1/4, 1/4, Section, Township and Range and County.
B.
The permittee shall be certain that all landfills used for water treatment plant
residuals disposal comply with the state and federal regulations for landfills
and solid waste disposal.
15.
If the answer to this question is yes a landowner notification form (found at
http://www.deq.state.ok.us/WQDnew/forms/landowner_notification_affidavit.pdf)
must be sent to the landowner and the applicant’s certifying official must initial the
box certifying that this has been done.
16.
All
other
information
regarding
the
facility
having
to
do
with
the
environmental/operational permits including maps, process diagrams, or chemical
analysis should be included with the permit application.
Form 2M2 Instructions - Page 4
The information provided in the application will be considered in the evaluation and
processing of a discharge permit for the referenced facility.
Be advised that test
procedures used in the analyses of influents, effluents and residuals, must conform to
approved EPA methodology or it will not be accepted for the discharge permit evaluation.
Please note that the application must be signed by the authorized chief elective or
executive officer of the applicant, or by the applicant if an individual. The authorized
signature must be notarized. An example of a common mistake is when a Public Works
Authority Chairman signs the application as - John Doe, Mayor. The Mayor is not the
legal official of the PWA; the chairman is, even if the individual holds both positions.
Please read the certification carefully. There are significant penalties for submitting false
information on this application form.
Please detach these instructions and return only the completed application form itself.
Form 2M2 Instructions - Page 5
Page of 11