Instructions for Form C-101 "Application for Permit to Drill, Re-enter, Deepen, Plugback or Add a Zone" - New Mexico

This document contains official instructions for Form C-101, Application for Permit to Drill, Re-enter, Deepen, Plugback or Add a Zone - a form released and collected by the New Mexico Energy, Minerals and Natural Resources Department. An up-to-date fillable Form C-101 is available for download through this link.

Instruction Details:

  • This 1-page document is available for download in PDF;
  • Actual and applicable for the current year;
  • Complete, printable, and free.

Download your copy of the instructions by clicking the link below or browse hundreds of other forms in our library of forms released by the New Mexico Energy, Minerals and Natural Resources Department.

ADVERTISEMENT
ADVERTISEMENT

Download Instructions for Form C-101 "Application for Permit to Drill, Re-enter, Deepen, Plugback or Add a Zone" - New Mexico

Download PDF

Fill PDF online

Rate (4.4 / 5) 16 votes
C-101 Instructions
Revised November 14, 2012
Measurements and dimensions are to be in feet/inches. Well locations will refer to the New Mexico Principal Meridian.
IF THIS IS AN AMENDED REPORT CHECK THE BOX LABELED “AMENDED REPORT” AT THE TOP OF THE C-101 FORM.
1.
Operator's name and address.
2.
Operator's OGRID number. If you do not have one, please read the FAQ “How Do I Become A Well Operator” at
www.emnrd.state.nm.us/ocd.
3.
API number of this well. If this is a new drill the OCD will assign the number and fill this in.
4.
Property code. If this is a new property the OCD will assign the number and fill it in.
5.
Property name that used to be called 'well name'.
6.
The number of this well on the property.
7.
The surveyed location of this well New Mexico Principal Meridian. NOTE: If the United States government survey designates a Lot Number
for this location use that number in the 'UL or lot no.' box. Otherwise use the OCD Unit Letter.
8.
The proposed bottom hole location of this well at TD. For multi-lateral well, report first proposed lateral’s bottom hole location. A C-102 is
required for each multi-lateral drilled.
9.
The proposed pool(s) to which this well is being drilled.
10.
Intentionally omitted.
11.
Work type code from the following table:
N
New well
E
Re-entry
D
Drill deeper
P
Plugback
A
Add a zone
12.
Well type code from the following table:
O
Single oil completion
G
Single gas completion
M
Miscellaneous
I
Injection well
S
SWD well
W
Water supply well
C
Carbon dioxide well
13.
Cable or rotary drilling code
C
Proposed to cable tool drill
R
Proposed to rotary drill
14.
Lease type code from the following table:
S
State
P
Private
15.
Ground level elevation above sea level.
16.
Intend to multiple complete? Yes or No. Attach intended well bore diagram.
17.
Proposed total depth of this well.
18.
Geologic formation at TD.
19.
Name of the intended drilling company if known.
20.
Anticipated spud date.
21.
Proposed hole size ID inches, proposed casing OD inches, casing weight in pounds per foot, setting depth of the casing or depth and top of
liner, proposed cementing volume, and estimated top of cement. If more than 3 types, provide attachment with additional information.
22.
Proposed Blowout Preventer Specifications. Also attach your proposed drilling program.
23.
The signature, printed name, title, and e-mail address of the person authorized to make this report. The date this report was signed and the
telephone number to call for questions about this report.
C-101 Instructions
Revised November 14, 2012
Measurements and dimensions are to be in feet/inches. Well locations will refer to the New Mexico Principal Meridian.
IF THIS IS AN AMENDED REPORT CHECK THE BOX LABELED “AMENDED REPORT” AT THE TOP OF THE C-101 FORM.
1.
Operator's name and address.
2.
Operator's OGRID number. If you do not have one, please read the FAQ “How Do I Become A Well Operator” at
www.emnrd.state.nm.us/ocd.
3.
API number of this well. If this is a new drill the OCD will assign the number and fill this in.
4.
Property code. If this is a new property the OCD will assign the number and fill it in.
5.
Property name that used to be called 'well name'.
6.
The number of this well on the property.
7.
The surveyed location of this well New Mexico Principal Meridian. NOTE: If the United States government survey designates a Lot Number
for this location use that number in the 'UL or lot no.' box. Otherwise use the OCD Unit Letter.
8.
The proposed bottom hole location of this well at TD. For multi-lateral well, report first proposed lateral’s bottom hole location. A C-102 is
required for each multi-lateral drilled.
9.
The proposed pool(s) to which this well is being drilled.
10.
Intentionally omitted.
11.
Work type code from the following table:
N
New well
E
Re-entry
D
Drill deeper
P
Plugback
A
Add a zone
12.
Well type code from the following table:
O
Single oil completion
G
Single gas completion
M
Miscellaneous
I
Injection well
S
SWD well
W
Water supply well
C
Carbon dioxide well
13.
Cable or rotary drilling code
C
Proposed to cable tool drill
R
Proposed to rotary drill
14.
Lease type code from the following table:
S
State
P
Private
15.
Ground level elevation above sea level.
16.
Intend to multiple complete? Yes or No. Attach intended well bore diagram.
17.
Proposed total depth of this well.
18.
Geologic formation at TD.
19.
Name of the intended drilling company if known.
20.
Anticipated spud date.
21.
Proposed hole size ID inches, proposed casing OD inches, casing weight in pounds per foot, setting depth of the casing or depth and top of
liner, proposed cementing volume, and estimated top of cement. If more than 3 types, provide attachment with additional information.
22.
Proposed Blowout Preventer Specifications. Also attach your proposed drilling program.
23.
The signature, printed name, title, and e-mail address of the person authorized to make this report. The date this report was signed and the
telephone number to call for questions about this report.