Form B4 "Application for Air Permit to Construct/Operate - Emission Source (Woodworking)" - North Carolina

What Is Form B4?

This is a legal form that was released by the North Carolina Department of Environmental Quality - a government authority operating within North Carolina. As of today, no separate filing guidelines for the form are provided by the issuing department.

Form Details:

  • Released on September 22, 2016;
  • The latest edition provided by the North Carolina Department of Environmental Quality;
  • Easy to use and ready to print;
  • Quick to customize;
  • Compatible with most PDF-viewing applications;
  • Fill out the form in our online filing application.

Download a fillable version of Form B4 by clicking the link below or browse more documents and templates provided by the North Carolina Department of Environmental Quality.

ADVERTISEMENT
ADVERTISEMENT

Download Form B4 "Application for Air Permit to Construct/Operate - Emission Source (Woodworking)" - North Carolina

Download PDF

Fill PDF online

Rate (4.6 / 5) 54 votes
FORM B4
EMISSION SOURCE (WOODWORKING)
B4
REVISED 09/22/16
NCDEQ/Division of Air Quality - Application for Air Permit to Construct/Operate
EMISSION SOURCE DESCRIPTION:
EMISSION SOURCE ID NO:
CONTROL DEVICE ID NO(S):
OPERATING SCENARIO: _____________ OF ______________
EMISSION PT. (STACK) ID NO(S):
USE THIS FORM TO IDENTIFY PARTICULATE EMISSION SOURCES FROM THE SAWING, SANDING, PLANING, ETC. OF WOOD AND WOOD PRODUCTS.
WOODWORKING OPERATIONS COLOCATED AND VENTING TO THE SAME CONTROL DEVICE OR GROUP OF CONTROL DEVICES CAN BE GROUPED
TOGETHER (I.E. MACHINE ROOM #1 VENTING TO TWO BAGFILTERS). LARGER WOODWORKING FACILITIES SHOULD SEPARATE ROUGH END, MACHINE
ROOMS, AND SANDING ON SEPARATE FORMS. SOURCES VENTING TO DIFFERENT CONTROL DEVICES SHOULD NOT BE GROUPED TOGETHER. (I.E.
SOURCES VENTING TO A BAGFILTER SHOULD NOT BE GROUPED WITH SOURCES VENTING TO A CYCLONE)
DESCRIBE THE WOODWORKING OPERATION
DESCRIBE THE WOODWORKING OPERATION IN DETAIL. INCLUDE THE TYPES OF WOODWORKING AND AMOUNT OF EACH TYPE (I.E. FIVE BAND SAWS, TWO
ABRASIVE PLANERS AND ONE TURNING LATHE). ALSO, ATTACH FLOWCHART OR DIAGRAM OF SYSTEM(S):
TYPE OF WOOD:
SOFT
HARD
DRY WOOD (<19% MOISTURE)
% MOISTURE _________
GREEN WOOD OR
IS THIS OPERATION CONTROLLED:
YES
NO
IF YES:
CYCLONE
BAGFILTER
OTHER _______________________
% OF ANNUAL HOURS VENTING INDOORS:
LOSS (% WASTE):
AVERAGE LB/BD-FT:
ACTUAL BD-FT/YEAR:
MAXIMUM BD-FT/HOUR:
QUANTIFY THE AMOUNT OF WOODWASTE GENERATED
TOTAL WASTE
IF THIS GROUP OF WOODWORKING MACHINES WERE OPERATING AT MAXIMUM CAPACITY, WHAT IS THE EXPECTED TOTAL
WASTE GENERATED PER HOUR (INCLUDING BLOCKS, DUST, AND MATERIAL VENTED TO THE DUCTWORK) ?
LB/HOUR
8760 HOURS/YR
MULTIPLY BY
2000 LB/TON
DIVIDE BY
THE POTENTIAL AMOUNT OF TOTAL WASTE EXPECTED ON ANNUAL BASIS (INCLUDING BLOCKS) =
TON/YEAR
WASTE VENTED TO THE DUCTWORK (MAXIMUM)
IF THIS GROUP OF WOODWORKING MACHINES WERE OPERATING AT MAXIMUM CAPACITY, WHAT IS THE EXPECTED TOTAL
WASTE GENERATED PER HOUR INCLUDING ONLY MATERIAL VENTED TO THE DUCTWORK (NO BLOCKS) ?
LB/HOUR
8760 HOURS/YR
MULTIPLY BY
2000 LB/TON
DIVIDE BY
TOTAL POTENTIAL WASTE VENTED TO THE DUCTWORK =
TON/YEAR
(VALUE A)
WASTE VENTED TO THE DUCTWORK (ACTUAL)
WHAT IS THE ACTUAL AMOUNT OF WASTE EXPECTED ON AN ANNUAL BASIS VENTED TO THE DUCTWORK:
TON/YEAR
(VALUE B)
CHARACTERIZE THE "IN DUCT" WOODWASTE
FOR THIS SOURCE, INDICATE THE PERCENTAGE OF "IN DUCT" WASTE FROM EACH TYPE OF OPERATION (OR CLOSEST TYPE):
THE WASTE VENTED TO
POTENTIAL TONS TO DUCTWORK
ACTUAL TONS TO DUCTWORK
THE DUCTWORK IS
(SHOULD EQUAL % ON LEFT
(SHOULD EQUAL % ON LEFT
FROM: (INDICATE %)
COLUMN TIMES VALUE A )
COLUMN TIMES VALUE B )
PLANING
SHAVING/CHIPPING
ROUGH SAWING
FINE SAWING
MILLING (INCLUDING HOG)
MOLDING
SANDING
OTHER:
TOTAL:
100%
TOTAL = VALUE A
TOTAL = VALUE B
ATTACH ALL CALCULATIONS, SUPPORTING DOCUMENTATION, AND FLOWCHARTS/DIAGRAMS OF SYSTEM(S).
Comments:
Attach Additional Sheets As Necessary
FORM B4
EMISSION SOURCE (WOODWORKING)
B4
REVISED 09/22/16
NCDEQ/Division of Air Quality - Application for Air Permit to Construct/Operate
EMISSION SOURCE DESCRIPTION:
EMISSION SOURCE ID NO:
CONTROL DEVICE ID NO(S):
OPERATING SCENARIO: _____________ OF ______________
EMISSION PT. (STACK) ID NO(S):
USE THIS FORM TO IDENTIFY PARTICULATE EMISSION SOURCES FROM THE SAWING, SANDING, PLANING, ETC. OF WOOD AND WOOD PRODUCTS.
WOODWORKING OPERATIONS COLOCATED AND VENTING TO THE SAME CONTROL DEVICE OR GROUP OF CONTROL DEVICES CAN BE GROUPED
TOGETHER (I.E. MACHINE ROOM #1 VENTING TO TWO BAGFILTERS). LARGER WOODWORKING FACILITIES SHOULD SEPARATE ROUGH END, MACHINE
ROOMS, AND SANDING ON SEPARATE FORMS. SOURCES VENTING TO DIFFERENT CONTROL DEVICES SHOULD NOT BE GROUPED TOGETHER. (I.E.
SOURCES VENTING TO A BAGFILTER SHOULD NOT BE GROUPED WITH SOURCES VENTING TO A CYCLONE)
DESCRIBE THE WOODWORKING OPERATION
DESCRIBE THE WOODWORKING OPERATION IN DETAIL. INCLUDE THE TYPES OF WOODWORKING AND AMOUNT OF EACH TYPE (I.E. FIVE BAND SAWS, TWO
ABRASIVE PLANERS AND ONE TURNING LATHE). ALSO, ATTACH FLOWCHART OR DIAGRAM OF SYSTEM(S):
TYPE OF WOOD:
SOFT
HARD
DRY WOOD (<19% MOISTURE)
% MOISTURE _________
GREEN WOOD OR
IS THIS OPERATION CONTROLLED:
YES
NO
IF YES:
CYCLONE
BAGFILTER
OTHER _______________________
% OF ANNUAL HOURS VENTING INDOORS:
LOSS (% WASTE):
AVERAGE LB/BD-FT:
ACTUAL BD-FT/YEAR:
MAXIMUM BD-FT/HOUR:
QUANTIFY THE AMOUNT OF WOODWASTE GENERATED
TOTAL WASTE
IF THIS GROUP OF WOODWORKING MACHINES WERE OPERATING AT MAXIMUM CAPACITY, WHAT IS THE EXPECTED TOTAL
WASTE GENERATED PER HOUR (INCLUDING BLOCKS, DUST, AND MATERIAL VENTED TO THE DUCTWORK) ?
LB/HOUR
8760 HOURS/YR
MULTIPLY BY
2000 LB/TON
DIVIDE BY
THE POTENTIAL AMOUNT OF TOTAL WASTE EXPECTED ON ANNUAL BASIS (INCLUDING BLOCKS) =
TON/YEAR
WASTE VENTED TO THE DUCTWORK (MAXIMUM)
IF THIS GROUP OF WOODWORKING MACHINES WERE OPERATING AT MAXIMUM CAPACITY, WHAT IS THE EXPECTED TOTAL
WASTE GENERATED PER HOUR INCLUDING ONLY MATERIAL VENTED TO THE DUCTWORK (NO BLOCKS) ?
LB/HOUR
8760 HOURS/YR
MULTIPLY BY
2000 LB/TON
DIVIDE BY
TOTAL POTENTIAL WASTE VENTED TO THE DUCTWORK =
TON/YEAR
(VALUE A)
WASTE VENTED TO THE DUCTWORK (ACTUAL)
WHAT IS THE ACTUAL AMOUNT OF WASTE EXPECTED ON AN ANNUAL BASIS VENTED TO THE DUCTWORK:
TON/YEAR
(VALUE B)
CHARACTERIZE THE "IN DUCT" WOODWASTE
FOR THIS SOURCE, INDICATE THE PERCENTAGE OF "IN DUCT" WASTE FROM EACH TYPE OF OPERATION (OR CLOSEST TYPE):
THE WASTE VENTED TO
POTENTIAL TONS TO DUCTWORK
ACTUAL TONS TO DUCTWORK
THE DUCTWORK IS
(SHOULD EQUAL % ON LEFT
(SHOULD EQUAL % ON LEFT
FROM: (INDICATE %)
COLUMN TIMES VALUE A )
COLUMN TIMES VALUE B )
PLANING
SHAVING/CHIPPING
ROUGH SAWING
FINE SAWING
MILLING (INCLUDING HOG)
MOLDING
SANDING
OTHER:
TOTAL:
100%
TOTAL = VALUE A
TOTAL = VALUE B
ATTACH ALL CALCULATIONS, SUPPORTING DOCUMENTATION, AND FLOWCHARTS/DIAGRAMS OF SYSTEM(S).
Comments:
Attach Additional Sheets As Necessary