Instructions for Form DS1 "Demolition Submittal Certification Form" - New York City

This document contains official instructions for Form DS1, Demolition Submittal Certification Form - a form released and collected by the New York City Department of Buildings. An up-to-date fillable Form DS1 is available for download through this link.

Instruction Details:

  • This 1-page document is available for download in PDF;
  • Actual and applicable for the current year;
  • Complete, printable, and free.

Download your copy of the instructions by clicking the link below or browse hundreds of other forms in our library of forms released by the New York City Department of Buildings.

ADVERTISEMENT
ADVERTISEMENT

Download Instructions for Form DS1 "Demolition Submittal Certification Form" - New York City

410 times
Rate (4.5 / 5) 29 votes
DS1
INSTRUCTIONS
Purpose of form:
This form is required when submitting demolition submittal plans - required by BC 3306.5 on full demolition jobs and Alteration jobs that contain
partial demolition work. The form must be submitted together with the plans prior to requesting a permit. The form must be completed by an
appropriate professional.
Be sure to attach the appropriate job number sticker and write its related document number in the boxes at the upper right hand corner of the
form.
If there are changes made to existing demolition submittal plans or to the information contained in a previously submitted DS1, submit an
updated DS1 to supersede the older version.
1 Location Information
Enter the basic address information where the work will take place. Indicate which floor(s) will be affected by the work.
2 Preparer Information
Enter all details regarding the professional that is preparing the demolition submittal plans.
Indicate the relationship of the preparer to the job. For example, if the preparer is a PW1 applicant that also designed the architectural plans,
check off the “PW1 Applicant” check box.
3 Demolition Certification by Preparer
The preparer must certify all facts about the submission in this section. Indicate if this is an initial DS1 (submitted for the first time), or if this DS1
is being submitted to supersede a previously submitted DS1(s). Enter the scan code(s) of the DS1(s) being superseded by this DS1. The scan
code is an alpha-numeric code that begins with ‘SC’, and it can be found on the top right section of the scanned DS1 form.
3A Indicate the type of demolition that will occur on the site - Full Demolition (DM) or Partial Demolition (ALT).
3B Indicate the characteristic of demolition work that will take place on the work site. Check off all check-boxes as applicable. Enter the types of
mechanical demolition equipment that will be utilized on the site - a general description of each type of equipment is sufficient.
Note: authorized preparers (i.e. P.E., R.A., or both) for each type of demolition are indicated in brackets.
3C If this DS1 form is being submitted as a result of changes made to previously submitted plans, enter the scan code of the accompanying AI1
form(s) submitted with the revised plans.
The scan code is an alpha-numeric code that begins with ‘SC’, and it can be found on the top right section of the AI1 form.
3D Check the check-box to certify the preparer statement. The preparer’s signature and seal are required for all certification forms.
12/09
DS1
INSTRUCTIONS
Purpose of form:
This form is required when submitting demolition submittal plans - required by BC 3306.5 on full demolition jobs and Alteration jobs that contain
partial demolition work. The form must be submitted together with the plans prior to requesting a permit. The form must be completed by an
appropriate professional.
Be sure to attach the appropriate job number sticker and write its related document number in the boxes at the upper right hand corner of the
form.
If there are changes made to existing demolition submittal plans or to the information contained in a previously submitted DS1, submit an
updated DS1 to supersede the older version.
1 Location Information
Enter the basic address information where the work will take place. Indicate which floor(s) will be affected by the work.
2 Preparer Information
Enter all details regarding the professional that is preparing the demolition submittal plans.
Indicate the relationship of the preparer to the job. For example, if the preparer is a PW1 applicant that also designed the architectural plans,
check off the “PW1 Applicant” check box.
3 Demolition Certification by Preparer
The preparer must certify all facts about the submission in this section. Indicate if this is an initial DS1 (submitted for the first time), or if this DS1
is being submitted to supersede a previously submitted DS1(s). Enter the scan code(s) of the DS1(s) being superseded by this DS1. The scan
code is an alpha-numeric code that begins with ‘SC’, and it can be found on the top right section of the scanned DS1 form.
3A Indicate the type of demolition that will occur on the site - Full Demolition (DM) or Partial Demolition (ALT).
3B Indicate the characteristic of demolition work that will take place on the work site. Check off all check-boxes as applicable. Enter the types of
mechanical demolition equipment that will be utilized on the site - a general description of each type of equipment is sufficient.
Note: authorized preparers (i.e. P.E., R.A., or both) for each type of demolition are indicated in brackets.
3C If this DS1 form is being submitted as a result of changes made to previously submitted plans, enter the scan code of the accompanying AI1
form(s) submitted with the revised plans.
The scan code is an alpha-numeric code that begins with ‘SC’, and it can be found on the top right section of the AI1 form.
3D Check the check-box to certify the preparer statement. The preparer’s signature and seal are required for all certification forms.
12/09