Form OP-UA42 (TCEQ-10093) "Phosphate Fertilizer Manufacturing Attributes" - Texas

What Is Form OP-UA42 (TCEQ-10093)?

This is a legal form that was released by the Texas Commission on Environmental Quality - a government authority operating within Texas. As of today, no separate filing guidelines for the form are provided by the issuing department.

Form Details:

  • Released on October 1, 2015;
  • The latest edition provided by the Texas Commission on Environmental Quality;
  • Easy to use and ready to print;
  • Quick to customize;
  • Compatible with most PDF-viewing applications;
  • Fill out the form in our online filing application.

Download a printable version of Form OP-UA42 (TCEQ-10093) by clicking the link below or browse more documents and templates provided by the Texas Commission on Environmental Quality.

ADVERTISEMENT
ADVERTISEMENT

Download Form OP-UA42 (TCEQ-10093) "Phosphate Fertilizer Manufacturing Attributes" - Texas

Download PDF

Fill PDF online

Rate (4.7 / 5) 27 votes
Texas Commission on Environmental Quality
Form OP-UA42
Phosphate Fertilizer Manufacturing Attributes
General:
This form is used to provide a description and data pertaining to all phosphate fertilizer manufacturing facilities with
potentially applicable requirements associated with a particular regulated entity number and application. Each table
number, along with the possibility of a corresponding letter (i.e., Table 1a, Table 1b), corresponds to a certain state or
federal rule. If the rule on the table is not potentially applicable to a phosphate fertilizer manufacturing facility, then it
should be left blank and need not be submitted with the application. If the codes entered by the applicant show negative
applicability to the rule or sections of the rule represented on the table, then the applicant need not complete the remainder
of the table(s) that corresponds to the rule. Further instruction as to which questions should be answered and which
questions should not be answered are located in the “Specific” section of the instruction text. The following is included in
this form:
Table 1:
Title 40 Code of Federal Regulations Part 60 (40 CFR Part 60)
Subpart T: Standards of Performance for the Phosphate Fertilizer Industry: Wet-Process Phosphoric
Acid Plants
Table 2:
Title 40 Code of Federal Regulations Part 60 (40 CFR Part 60)
Subpart U: Standards of Performance for the Phosphate Fertilizer Industry: Superphosphoric Acid Plants
Table 3:
Title 40 Code of Federal Regulations Part 60 (40 CFR Part 60)
Subpart V: Standards of Performance for the Phosphate Fertilizer Industry: Diammonium Phosphate
Plants
Table 4:
Title 40 Code of Federal Regulations Part 60 (40 CFR Part 60)
Subpart W: Standards of Performance for the Phosphate Fertilizer Industry: Triple Superphosphate
Plants
Table 5:
Title 40 Code of Federal Regulations Part 60 (40 CFR Part 60)
Subpart X: Standards of Performance for the Phosphate Fertilizer Industry: Granular Triple
Superphosphate Storage Facilities
The Texas Commission on Environmental Quality (TCEQ) Regulated Entity Number (RNXXXXXXXXX) and the
application area name from Form OP-1 (Site Information Summary) must appear in the header of each page for the
purpose of identification for the initial submittal. The date of the initial form submittal must also be included and should
be consistent throughout the application (MM/DD/YYYY). Leave the permit number blank for the initial form
submittal. If this form is included as part of the permit revision process, enter the permit number assigned by the TCEQ,
the area name (from Form OP-1), the date of the revision submittal, and regulated entity number.
Data elements which do not require a response from all applicants are preceded by qualification criteria in the instructions.
If the unit does not meet the qualification criteria, a response to the question is not required. Anytime a response is not
required, leave the space on the form blank.
In some situations, the applicant has the option of selecting alternate requirements, limitations, and/or practices for a unit.
Note that these alternate requirements, limitations, and/or practices must have the required approval from the TCEQ
Executive Director and/or the U.S. Environmental Protection Agency Administrator before the federal operating permit
application is submitted.
TCEQ - 10093 (APDG 5280v11, Revised 10/15) OP-UA42
This form is for use by facilities subject to air quality permit requirements and
may be revised periodically (Title V Release 11/04)
Page 1 of 4
Texas Commission on Environmental Quality
Form OP-UA42
Phosphate Fertilizer Manufacturing Attributes
General:
This form is used to provide a description and data pertaining to all phosphate fertilizer manufacturing facilities with
potentially applicable requirements associated with a particular regulated entity number and application. Each table
number, along with the possibility of a corresponding letter (i.e., Table 1a, Table 1b), corresponds to a certain state or
federal rule. If the rule on the table is not potentially applicable to a phosphate fertilizer manufacturing facility, then it
should be left blank and need not be submitted with the application. If the codes entered by the applicant show negative
applicability to the rule or sections of the rule represented on the table, then the applicant need not complete the remainder
of the table(s) that corresponds to the rule. Further instruction as to which questions should be answered and which
questions should not be answered are located in the “Specific” section of the instruction text. The following is included in
this form:
Table 1:
Title 40 Code of Federal Regulations Part 60 (40 CFR Part 60)
Subpart T: Standards of Performance for the Phosphate Fertilizer Industry: Wet-Process Phosphoric
Acid Plants
Table 2:
Title 40 Code of Federal Regulations Part 60 (40 CFR Part 60)
Subpart U: Standards of Performance for the Phosphate Fertilizer Industry: Superphosphoric Acid Plants
Table 3:
Title 40 Code of Federal Regulations Part 60 (40 CFR Part 60)
Subpart V: Standards of Performance for the Phosphate Fertilizer Industry: Diammonium Phosphate
Plants
Table 4:
Title 40 Code of Federal Regulations Part 60 (40 CFR Part 60)
Subpart W: Standards of Performance for the Phosphate Fertilizer Industry: Triple Superphosphate
Plants
Table 5:
Title 40 Code of Federal Regulations Part 60 (40 CFR Part 60)
Subpart X: Standards of Performance for the Phosphate Fertilizer Industry: Granular Triple
Superphosphate Storage Facilities
The Texas Commission on Environmental Quality (TCEQ) Regulated Entity Number (RNXXXXXXXXX) and the
application area name from Form OP-1 (Site Information Summary) must appear in the header of each page for the
purpose of identification for the initial submittal. The date of the initial form submittal must also be included and should
be consistent throughout the application (MM/DD/YYYY). Leave the permit number blank for the initial form
submittal. If this form is included as part of the permit revision process, enter the permit number assigned by the TCEQ,
the area name (from Form OP-1), the date of the revision submittal, and regulated entity number.
Data elements which do not require a response from all applicants are preceded by qualification criteria in the instructions.
If the unit does not meet the qualification criteria, a response to the question is not required. Anytime a response is not
required, leave the space on the form blank.
In some situations, the applicant has the option of selecting alternate requirements, limitations, and/or practices for a unit.
Note that these alternate requirements, limitations, and/or practices must have the required approval from the TCEQ
Executive Director and/or the U.S. Environmental Protection Agency Administrator before the federal operating permit
application is submitted.
TCEQ - 10093 (APDG 5280v11, Revised 10/15) OP-UA42
This form is for use by facilities subject to air quality permit requirements and
may be revised periodically (Title V Release 11/04)
Page 1 of 4
OP-UA42 Instructions
The Texas Commission on Environmental Quality (TCEQ) requires that a Core Data Form be submitted on all incoming
registration unless all the following are met: the Regulated Entity and Customer Reference Number have been issued by
the TCEQ which maintains information about TCEQ customers and regulated activities, such as company names,
addresses, and telephone numbers. This information is commonly referred as “core data” and make changes when
necessary. When core data about a facility is moved to the Central Registry, two new identification numbers are assigned:
the Customer Reference (CN) number and the Regulated Entity (RN) number. The Core Data Form is required if facility
records are not yet part of the Central Registry or if core data for a facility has changed. If this is the initial registration,
permit, or license for a facility site, then the Core Data Form must be completed and submitted with Core Data Form is
not required, unless any core data information has changed. To review additional information regarding the Central
Registry, go to the TCEQ website at www.tceq.gov/permitting/central_registry.
Specific:
Table 1:
Title 40 Code of Federal Regulations Part 60 (40 CFR Part 60)
Subpart T: Standards of Performance for the Phosphate Fertilizer Industry: Wet-process
Phosphoric Acid Plants
Process ID No.: Enter the identification number (ID No.) for the wet-process phosphoric acid plant
(maximum 10 characters) as listed on Form OP-SUM (Individual Unit Summary).
SOP Index No.: Site operating permit (SOP) applicants should indicate the SOP index number for the unit or group of
units (maximum 15 characters consisting of numeric, alphanumeric characters, and/or dashes prefixed by a code for the
applicable regulation [i.e., 60KB-XXXX]). For additional information relating to SOP index numbers, please refer to the
TCEQ website at www.tceq.texas.gov/assets/public/permitting/air/Guidance/Title_V/sop_initial.pdf.
Design Capacity: Select one of the following options that describes the design capacity of the facility. Enter the code on
the form.
Code
Description
15-
The design capacity of the facility < 15 tons of equivalent phosphorus pentoxide (P
O
) feed per
2
5
day
15+
The design capacity of the facility > 15 tons of equivalent P
O
feed per day
2
5
Complete “Facility Type” only if “Design Capacity” is “15+.”
Facility Type: Enter “YES” if the facility is any combination of reactors, filters, evaporators, and/or hot wells.
Otherwise, enter “NO.”
Complete “Construction/Modification Date” only if “Facility Type” is “YES.”
Construction/Modification Date: Select one of the following options that describes the date of commencement of the
most recent construction, modification, or reconstruction. Enter the code on the form.
Code
Description
74-
On or before October 22, 1974
74+
After October 22, 1974
TCEQ - 10093 (APDG 5280v11, Revised 10/15) OP-UA42
This form is for use by facilities subject to air quality
permit requirements and may be revised periodically (Title V Release 11/04)
Page 2 of 4
OP-UA42 Instructions
Table 2:
Title 40 Code of Federal Regulations Part 60 (40 CFR Part 60)
Subpart U: Standards of Performance for the Phosphate Fertilizer Industry: Superphosphoric
Acid Plants
Process ID No.: Enter the identification number (ID No.) for the superphosphoric acid plant (maximum 10 characters) as
listed on Form OP-SUM (Individual Unit Summary).
SOP Index No.: Site operating permit (SOP) applicants should indicate the SOP index number for the unit or group of
units (maximum 15 characters consisting of numeric, alphanumeric characters, and/or dashes prefixed by a code for the
applicable regulation [i.e., 60KB-XXXX]). For additional information relating to SOP index numbers, please refer to the
TCEQ website at www.tceq.texas.gov/assets/public/permitting/air/Guidance/Title_V/sop_initial.pdf.
Design Capacity: Select one of the following options that describes the design capacity of the facility. Enter the code on
the form.
Code
Description
15-
The design capacity of the facility < 15 tons of equivalent P
O
feed per day
2
5
15+
The design capacity of the facility > 15 tons of equivalent P
O
feed per day
2
5
Complete “Facility Type” only if “Design Capacity” is “15+.”
Facility Type: Enter “YES” if the facility is any combination of evaporators, hot wells, acid stump, and/or cooling tanks.
Otherwise, enter “NO.”
Complete “Construction/Modification Date” only if “Facility Type” is “YES.”
Construction/Modification Date: Select one of the following options that describes the date of commencement of the
most recent construction, modification, or reconstruction. Enter the code on the form.
Code
Description
74-
On or before October 22, 1974
74+
After October 22, 1974
Table 3:
Title 40 Code of Federal Regulations Part 60 (40 CFR Part 60)
Subpart V: Standards of Performance for the Phosphate Fertilizer Industry: Diammonium
Phosphate Plants
Process ID No.: Enter the identification number (ID No.) for diammonium phosphate plants (maximum 10 characters) as
listed on Form OP-SUM (Individual Unit Summary).
SOP Index No.: Site operating permit (SOP) applicants should indicate the SOP index number for the unit or group of
units (maximum 15 characters consisting of numeric, alphanumeric characters, and/or dashes prefixed by a code for the
applicable regulation [i.e., 60KB-XXXX]). For additional information relating to SOP index numbers, please refer to the
TCEQ website at www.tceq.texas.gov/assets/public/permitting/air/Guidance/Title_V/sop_initial.pdf.
Design Capacity: Select one of the following options that best describes the design capacity of the facility. Enter the
code on the form.
Code
Description
15-
The design capacity of the facility < 15 tons of equivalent P
O
feed per day
2
5
15+
The design capacity of the facility > 15 tons of equivalent P
O
feed per day
2
5
Complete “Facility Type” only if “Design Capacity” is “15+.”
TCEQ - 10093 (APDG 5280v11, 10/15) OP-UA42
This form is for use by facilities subject to air quality
permit requirements and may be revised periodically (Title V Release 11/04)
Page 3 of 4
OP-UA42 Instructions
Facility Type: If the facility is any combination of reactors, granulators, dryers, coolers, screens and/or mills, enter
“YES.” Otherwise, enter “NO.”
Complete “Construction/Modification Date” only if “Facility Type” is “YES.”
Construction/Modification Date: Select one of the following options that describes the date of commencement of the
most recent construction, modification, or reconstruction. Enter the code on the form.
Code
Description
74-
On or before October 22, 1974
74+
After October 22, 1974
Table 4:
Title 40 Code of Federal Regulations Part 60 (40 CFR Part 60)
Subpart W: Standards of Performance for the Phosphate Fertilizer Industry: Triple
Superphosphate Plants
Process ID No.: Enter the identification number (ID No.) for triple superphosphate plants (maximum 10 characters) as
listed on Form OP-SUM (Individual Unit Summary).
SOP Index No.: Site operating permit (SOP) applicants should indicate the SOP index number for the unit or group of
units (maximum 15 characters consisting of numeric, alphanumeric characters, and/or dashes prefixed by a code for the
applicable regulation [i.e., 60KB-XXXX]). For additional information relating to SOP index numbers, please refer to the
TCEQ website at www.tceq.texas.gov/assets/public/permitting/air/Guidance/Title_V/sop_initial.pdf.
Design Capacity: Select one of the following options that best describes the design capacity of the facility. Enter the
code on the form.
Code
Description
15-
The design capacity of the facility < 15 tons of equivalent P
O
feed per day
2
5
15+
The design capacity of the facility > 15 tons of equivalent P
O
feed per day
2
5
Complete “Facility Type” only if “Design Capacity” is “15+.”
Facility Type: Enter “YES” if the facility is any combination of mixers, curing belts (dens), reactors, granulators, dryers,
cookers, screens, mills, and/or facilities which store run-of pile triple phosphate. Otherwise, enter “NO.”
Complete “Construction/Modification Date” only if “Facility Type” is “YES.”
Construction/Modification Date: Select one of the following options that describes the date of commencement of the
most recent construction, modification, or reconstruction. Enter the code on the form.
Code
Description
74-
On or before October 22, 1974
74+
After October 22, 1974
Table 5:
Title 40 Code of Federal Regulations Part 60 (40 CFR Part 60)
Subpart X: Standards of Performance for the Phosphate Fertilizer Industry: Granular Triple
Superphosphate Storage Facilities
Process ID No.: Enter the identification number (ID No.) for the granular triple superphosphate storage facility
(maximum 10 characters) as listed on Form OP-SUM (Individual Unit Summary).
TCEQ - 10093 (APDG 5280v11, 10/15) OP-UA42
This form is for use by facilities subject to air quality
permit requirements and may be revised periodically (Title V Release 11/04)
Page 4 of 4
OP-UA42 Instructions
SOP INDEX NO.: Site operating permit (SOP) applicants should indicate the SOP index number for the unit or group of
units (maximum 15 characters consisting of numeric, alphanumeric characters, and/or dashes prefixed by a code for the
applicable regulation [i.e., 60KB-XXXX]). For additional information relating to SOP index numbers, please refer to the
TCEQ website at www.tceq.texas.gov/assets/public/permitting/air/Guidance/Title_V/sop_initial.pdf.
Facility Type: Enter “YES” if the facility is any combination of storage or curing piles, conveyors, elevators, screens,
and/or mills. Otherwise, enter “NO.”
Complete “Construction/Modification Date” only if “Facility Type” is “YES.”
Construction/Modification Date: Select one of the following options that describes the date of commencement of the
most recent construction, modification, or reconstruction. Enter the code on the form.
Code
Description
74-
On or before October 22, 1974
74+
After October 22, 1974
TCEQ - 10093 (APDG 5280v11, 10/15) OP-UA42
This form is for use by facilities subject to air quality
permit requirements and may be revised periodically (Title V Release 11/04)
Page 5 of 4